Please visit our new TrackAbout Knowledge Base at https://supportkb.trackabout.com for the most-up-to-date documentation on TrackAbout and TrackAbout Mobile.
Intermec CN70
|
Size: 6.66in L x 3.14in W x 1.35in D Weight: 16.6oz |
OS: Windows Embedded 6.5.3 Memory: 512MB RAM/1GB Flash |
How Tos:
=
Connect to computer === for the Intermec CN70E, you have to turn on the PxClient before it will be recognized by Windows Mobile Device Center
Warm Boot
- Press the Power button
- Select Reboot from the menu
Cold Boot
Warning: Cold booting any device can erase data and the TrackAbout software. Contact TrackAbout Support before attempting a cold boot.
- Press the Power button to suspend the handheld
- Remove the handstrap and the battery pack
- Press the Reset button in the battery compartment
- Press power and wait until the handheld reboots
Clean Boot
Warning: A clean boot erases all the memory in the handheld, including all applications and data files, except those in Flash memory or any removable storage. Contact TrackAbout Support before attempting a clean boot.
- Remove the battery pack from the back of the handheld
- With a stylus, press the Reset button in the battery cavity
- Insert the battery back into the handheld and immediately press and hold the Power button and the Volume Down button
- Continue to hold the Power button and the Volume Down button until you are prompted to release them
- Press the Volume Up button to start the clean boot
- Wait for the handheld to load files from its ROM
Environmental Specs:
Rain and Dust Resistance: IP67
Drop Specification:
- 8ft (2.4m) to concrete per MIL-STD 810G
- 2000 (1m) tumbles per IEC 60068-2-32 specification
Electrostatic Discharge:
- +/- 15 kV air discharge
- +/- 8 kV direct discharge