Warning
WARNING: The TrackAbout MetaWiki has been deprecated and is no longer being updated.

Please visit our new TrackAbout Knowledge Base at https://supportkb.trackabout.com for the most-up-to-date documentation on TrackAbout and TrackAbout Mobile.

Hardware Selection and Repair

From TrackAbout MetaWiki
Revision as of 12:05, 11 February 2013 by Eschurdak (talk | contribs)
Jump to navigation Jump to search



End of Life Notice


TrackAbout is announcing the end of support for the PalmOS handheld units. Due to the difficulties and prohibitive cost of supporting and maintaining aging hardware that is no longer manufactured nor supported by its vendor (Motorola Solutions), TrackAbout will stop support of the Palm OS handheld devices as of August 1, 2012. After this date, TrackAbout will begin charging $200 per support incident for help inquiries related to Palm OS handheld devices.



Handheld Selection


What kind of handhelds do you need? Here are the recommended handheld models from TrackAbout.

Device User Guide Notes
Es400 front.png
ES400 User Guide No additional notes
MC 1000.PNG
MC 1000 User Guide No additional notes
Symbol-MC3000.gif
MC 3000 User Guide
  • MC3090 Wireless: This handheld can only talk to the server by being syncronized in a docking station. This is recommended for drivers if you will not be doing any mobile printing.
MC3090.jpg
MC 3090 User Guide
  • MC3090 Wireless + Bluetooth:Bluetooth is recommended for any worker who might do mobile printing at some point. So a good question is whether or not you see your drivers doing paperless deliveries with printing receipts at customer sites some day. If so then you should consider the bluetooth handhelds.


  • This handheld can talk through a regular wifi network. This is the same kind of network that is used to connect laptops to the internet from airports and offices. This handheld is recommended for plant and dock handhelds. This wifi connection allows real-time inventory control and the handhelds can get wireless alerts and do other more interactive data transfer.


  • This device supports SD memory cards
MC 3190.PNG
MC 3190 User Guide
  • This device supports SDHC memory cards
MC 35.PNG
MC 35 User Guide No additional notes
MC 55.PNG
MC 55 User Guide No additional notes
MC65A.jpg
MC 65 Info
  • The MC65 Supports MicroSD or MicroSDHC cards up to 32GB in size.
  • TrackAbout recommends MicroSDHC Class 10 cards for the fastest speeds.
  • Any size is fine. The cheaper 8GB cards will be plenty of space.
MC 70.PNG
MC 70 Users Guide
  • MC70 Wireless + Bluetooth + Cellular: Cellular allows real-time communication with driver handhelds in the field. We do not have any customers that have gone with this option. The MC70s are also a different form factor which I think is not quite as good for heavy scanning as the MC30XX series of handhelds. Also with the advent of "MiFi" (wireless routers from Verizon and Sprint that are on the cellular network but support a local wifi network) you could put one of these MiFi devices in the truck and give the drivers real-time communication near the truck with a wifi device rather than a cellular device.


  • This device supports SD memory cards
MC75A.jpg
MC 75 User Guide No additional notes
MC9000.jpg
MC 909x User Guide No additional notes
Workabout.png
Workabout Pro User Guide No additional notes



Rugged Device Specifications


Specification Definition Recommendation
Ingress Protection Rating This evaluates how well a device stands up to environmental factors. Higher numbers designate greater protection. The first number refers to solids, the second number refers to liquids. IP54 at a minimum. IP64 is better.
Intrinsic Safety (I-Safe) An intrinsically safe device will not ignite combustibles. Intrinsic Safety ratings should be evaluated for devices used in hazardous environments. Certifications correspond to the hazardous environments for which a device is recommended for use.
MIL-STD US Military reliability testing standard which ensures that a device will perform in extreme weather conditions and withstand occasional shocks (drops). 810-G
Drop Spec This is a measurement of how far a device has been dropped and continued to perform. The test can vary from one manufacturer to another. The MIL-STD 810-G standard requires 26 drops from 1.2 m (4 ft) onto plywood.


Printers

Models


Device User Guide Notes
8i swfload 245x200.jpg
Datamax MICROFLASH 8i
(MF8i)
8i User Guide No additional notes
ONeil 4t.jpg
Datamax MICROFLASH 4T
(MF4t)
4t User Guide No additional notes

Datamax Repair Info

Contact Hayley Quinonnes at hqunones@datamax-oneil.com or 407-523-5701

Pricing Information

Contact Us for more information or to place an order.

Michelle Harda
(412) 269-1872
mharda@trackabout.com

Handheld Repair Program

Warranty and Repairs

See document below on how to address hardware issue:

PDF Document: Handheld Warranty Information and Repair Options

Palm Repairs

TrackAbout has a repair program for Symbol Palm Terminals. In association with Legacy, a company founded by ex-Symbol repair specialists, a preferred-customer repair program has been developed for TrackAbout customers.

Intrinsically Safe


Mobile Units including the Motorola MC 9500 and MC 9000 both meet or exceed Palm Device intrinsically safe rating which is Class 1 Division 2.

Class

Class l Areas in which flammable gases or vapors may be present in sufficient quantities to be explosive or ignitable.
Class ll Areas made hazardous by the presence of combustible dust.
Class lll Areas in which there are easily ignitable fibers or flyings present, due to the type of material being handled, stored or processed-but in which such fibers or flyings are not likely to be in suspension in the air in quantities sufficient to produce ignitable mixtures.

Divisions

Division 1 - Normal Situation: A hazard is present in the everyday normal production operation or during frequent repair and/or maintenance activity.
Division 2 - Abnormal Situation: Potentially hazardous material is expected to be safely confined within closed containers or closed systems, and will be present in the atmosphere only through accidental rupture, breakage, or abnormal operation.

Groups

Group A, B, C & D Gases and vapors in Class l locations are classified into four groups, by the code A, B, C, and D. These materials are grouped according to the ignition temperature of the substance, its explosion pressure and other flammability characteristics.
Groups E, F & G Combustible dust in Class ll locations are classified according to ignition temperature and t he conductivity of the hazardous substance.

Electric safe chart.png

Draft: Devices