Intermec CN70

Intermec CN70

Size: 6.66in L x 3.14in W x 1.35in D Weight: 16.6oz Display: Transmissive VGA touch, 3.5in LED backlight Expansion Slots: microSD, up to 32GB Bluetooth: Yes Cellular: Yes

OS: Windows Embedded 6.5.3 Memory: 512MB RAM/1GB Flash Processor: TI OMAP3 1GHz TI OMP3 600 MHz WiFi: 802.11a/b/g/n

Environmental Specs:

Rain and Dust Resistance: IP67

Drop Specification:

• 8ft (2.4m) to concrete per MIL-STD 810G
  
• 2000 (1m) tumbles per IEC 60068-2-32 specification
  

Electrostatic Discharge:

• +/- 15 kV air discharge
• +/- 8 kV direct discharge
  

How Tos:

Warm Boot

• Press the Power button
• Select Reboot from the menu
  

Cold Boot

Warning: Cold booting any device can erase data and the TrackAbout software. Contact TrackAbout Support before attempting a cold boot.

• Press the Power button to suspend the handheld
• Remove the handstrap and the battery pack
• Press the Reset button in the battery compartment
• Press power and wait until the handheld reboots

Clean Boot

Warning: A clean boot erases all the memory in the handheld, including all applications and data files, except those in Flash memory or any removable storage. Contact TrackAbout Support before attempting a clean boot.

• Remove the battery pack from the back of the handheld
• With a stylus, press the Reset button in the battery cavity
• Insert the battery back into the handheld and immediately press and hold the Power button and the Volume Down button
• Continue to hold the Power button and the Volume Down button until you are prompted to release them
• Press the Volume Up button to start the clean boot
• Wait for the handheld to load files from its ROM

More Information

Device User Guide

Specification Sheet

Manufacturer's Site

Handheld Warranty Information and Repair Options