Capturing Data - Chemical Totes

← Return To Getting Started - Chemical Totes

Summary

Phase Two of your Quick Start Implementation includes setting up your devices to capture data.

This is your guide to getting started with TrackAbout's iOS/Android Application. But first, there are some pre-requisites you need to review before continuing with this guide.

1. Getting Started - Chemical Totes - By this time, you should already be well on your way through this page which provides the steps for getting your system set up and configured to your particular needs. If you have not gone through Getting Started with TrackAbout please contact your OnTrack Implementation Specialist at Support@trackabout.com
2. Smartphone App --Have you downloaded the application yet? If not, you need to follow the Steps to get your devices ready for use.

Ready, Set, Go

Now that you have completed the pre-requisites, it's time to start using your app. We'll take you through some basic instructions and show you how the Smartphone application can be used.

Log into the TrackAbout app

On the mobile device, start the TrackAbout app by clicking the TrackAbout icon.

Login using the username or email address, and your password sent to you in your welcome email

Menu and Basics

You are now logged in. The main action menu is displayed.

Note that your screen might differ from what is shown here.

Tip Swipe right to display other action menu(s).

In the header of the app, you will always see two icons:

• Hamburger menu (three stacked lines) - This gives you access to the Asset Search, app settings and other features
• Synchronization - this button allows you to sync your app with your TrackAbout website. This pulls down the latest information from your website and also ensures any records currently on your devices are saved up to the site.

NOTE: You should be syncing your application at least on a daily basis to make sure you're working with the latest data from your TrackAbout system.

Basic Actions

Registering Totes

Physical Registration - Barcode and Tag Placement Best Practices

A crucial part of the registration process includes affixing a tag/barcode to the container. Review Labels for Chemical Totes for best practices for selecting and placing Roll Off Container tracking labels can be found here.

Note: A physical barcode should not be applied to a container before the "Scan Asset Barcode" step below. This will ensure that all barcoded containers have correct and complete information collected as they are registered in TrackAbout.

Add New

(you may choose to call this action by another name) is used for registering totes in your system.

• Optional Information: TrackAbout can insert custom screens to collect tote attributes.

When complete with all barcodes Tap Save in the upper right hand corner. Note When the action is saved, your device will provide visual and audible feedback.

If you do not have connectivity at save time, the app will automatically save your action at the next opportunity.

Locate Totes

This allows you to set an Tote's location.

Change Item Number

Also called Change Service or Reclassify Assets, this action is used to change the Item Number of a tote.

Change Barcode

Use this action when updating a tote's barcode. This is usually done when a tote's barcode has been damaged, removed or is just missing/

Fill Totes

TrackAbout's Filling process allows operators to set the product code on totes and transition their "Use State". Common uses of TrackAbout Filling transition totes from

• Empty to Full
• Dirty to Clean
• Not Ready to Ready

Here is a typical Filling process as seen on the Smartphone:

Receive from Vendor

Receive from Vendor (Also sometimes called Third Party Filling) is used to track totes that have been brought into one of your internal locations from a vendor or third party. This process is helpful if you want to track vendor owned totes with a less information than you want to track your own totes.

This is also a good process if you have totes Filled or Processed by a third party. This can be used to track that action and update the tote's use state.

Deliver Totes

The Delivery process is used to move your totes from an internal location to

1. A customer location
2. Another internal location

Customer Audit

The Customer Audit functionality allows you to compare what TrackAbout thinks a customer has on balance to what is found physically on-site.

The TrackAbout app is used to scan all totes found at a customer location and then the TrackAbout website is used to reconcile the audit. See the page on Customer Audit for more information about this process.

NEXT: Reviewing Data

Now that you have started to capture data, it's time to review and utilize that data. Proceed to the next page to learn about TrackAbout tools and reporting as available on your TrackAbout website.

Continue to Reviewing Data - Chemical Totes →