Intermec CN70

Size: 6.66in L x 3.14in W x 1.35in D

Weight: 16.6oz
Display: Transmissive VGA touch, 3.5in LED backlight
Expansion Slots: microSD, up to 32GB
Bluetooth: Yes
Cellular: Yes

OS: Windows Embedded

Memory: 512MB RAM/1GB Flash
Processor: TI OMAP3 1GHz
TI OMP3 600 MHz
WiFi: 802.11a/b/g/n

Environmental Specs:

Rain and Dust Resistance: IP67
Drop Specification: 8ft (2.4m) to concrete per MIL-STD 810G
:::2000 (1m) tumbles per IEC 60068-2-32 specification
Electrostatic Discharge: +/- 15 kV air discharge :::+/- 8 kV direct discharge

How Tos:

Warm Boot

Press the Power button
Select Reboot from the menu

Cold Boot

Warning: Cold booting any device can erase data and the TrackAbout software. Contact TrackAbout Support before attempting a cold boot.

Press the Power button to suspend the handheld
Remove the handstrap and the battery pack
Press the Reset button in the battery compartment
Press power and wait until the handheld reboots

Clean Boot

Warning: A clean boot erases all the memory in the handheld, including all applications and data files, except those in Flash memory or any removable storage. Contact TrackAbout Supprt before attempting a clean boot.

Remove the battery pack from the back of the handheld
With a stylus, press the Reset button in the battery cavity
Insert the battery back into the handheld and immediately press and hold the Power button and the Volume Down button
Continue to hold the Power button and the Volume Down button until you are prompted to release them
Press the Volume Up button to start the clean boot
Wait for the handheld to load files from its ROM