Certifying Windows Embedded Compact 7 Devices

The MC3200 or MC32N0 and MC9200 or MC92N0 rugged handhelds run the Windows Embedded Compact 7.0 operating system. To be able to run TrackAbout TAMobile 6 version 6.280 or above, these devices need to be upgraded and/or patched with a Zebra hotfix and also a registry update needs to be applied.

The MC3200 requires both the Hotfix and the Registry Update.

The MC9200 requires only the Registry Update.

Please ensure that either devices is on the latest OS or the minimum OS specified on the TrackAbout Certified Devices page.

Steps to upgrade

Warning

TrackAbout highly recommends the upgrade to be performed by an IT Specialist. TrackAbout cannot be held responsible for any consequences arising from the use of these instructions. If you need assistance to apply these patches, or want to have the patches be applies for you on your devices, please contact our partner: Supply Chain Services, LLC

Contact:

Don Tienter - IT Engineer/Project Manager
Email Address: dtienter@supplychainservices.com
Toll Free: 866-205-4310 x220
Direct: 651-202-4324
Web site: http://www.supplychainservices.com

MC3200 Only

Install Hotfix - MC3200 from Zebra Only

The latest available as of April 2016 is "Hot Fix BSP v60.51.19".

Download

You can download the patch from the following sources:

• Support Wiki using this link File:32N0BenUC615119.zip
• Our partner Supply Chain Services's FTP site - Click this link
• If you'd rather use the official Zebra site, use this download url.
  • You will need an account in the Zebra Portal site to download this file.
  • The site also asks for the Serial Number of the device before making the download available.

Installation

Instructions for the above are available from these sources:

• The Zebra portal site.
• Download the PDF file File:Release Notes – MC32N0 CE 7.0 Hot Fix BSP v61.51.19.pdf.

MC32000 and MC9200

Registry Update for MC3200 and MC9200

• Download the registry File:DotNetCF Debugger Fix.reg.doc
• Edit the file so that the complete file name ends with ".reg" (delete the .doc extension)
• Copy the DotNetCF_Debugger_Fix.reg file to the device's \Application folder
• Perform a hard reset (Press 1, 9, and Power simultaneously, then release all)

Install TAMobile 6

Install TAMobile 6 version 6.280 or above using this link

• After installation is complete perform a Warm Boot on the device.
  • There are two methods for warm boot on this device.
    • Hold down the Power button for approximately five seconds. As soon as the device starts to perform a warm boot release the Power button.
    • Navigating to the Windows Startup menu, Programs, then selecting 'Warm Boot'